|
VOP-ST Oil Purifier System
|
|
Overview
High vacuum is used for dehydration, degasification and filtration of high-voltage insulating oil. This process removes impurities and restores/improves the electrical, chemical and physical properties of the insulating oil.
The VOP-ST is the easiest and most economical way to degas and filter your:
- Transformers
- Load Tap Changers
- Switchgear
- Breakers
- Bushings
Features
- Vacudyne's unique vacuum chamber design
- Operator controls for ease of use and unattended operation
- Oil level control including high and low oil level safety shutdown
- TEFC motors
- Oil pump with single mechanical seals
- Low watt density heaters to aid in water removal
- NEMA 4 control cabinet with operator controls
- Outlet filter for particulate removal
- Vacuum pump to ensure a deep consistent vacuum
- Rigid steel hand cart for long lasting durability
- 12" pneumatic wheels
- 10 ft. electrical power cord
- 10 ft. inlet & 10 ft. outlet grounded hoses
- The entire exterior of the system (excluding electrical cabinet) is finished with an epoxy coating.
Specifications
| Rate |
70 GPH (265 LPH) |
| Oil |
Mineral based insulating oil/Rtemp (other upon request) |
| Water Removal |
100 ppm to < 5 ppm by ASTM method D 1533 |
| Total Gas Content |
12% to < 0.25% by volume by ASTM method D 2945 |
| Particulate Removal |
Filters 99% of particulates ≥ 0.5 microns |
| Dielectric Strength |
Restores the oil dielecric strength to manufacturer's original specification by ASTM method D1816 |
| Power Source |
120VAC 1-Phase 60Hz (Alternate power configurations available) |
| Dimensions |
2'-2" W x 4'-9" H x 2'-3" L (0.7m W x 1.45m H x 0.7m L) |
| Weight |
252lbs (114 kg) |
Options
- Hose monitors with automatic shutoff
- Operate on energized transformers
- Alternate power configurations
- Fuller's earth cartridge
- Moisture analyzer
- Electronic or mechanical totalizer and flow meter
- Alternate hose, seals and gasket material
- Extra length hoses with choice of connections
- And more
Applications
High vacuum is used for dehydration, degasification and filtration of high-voltage insulating oil. This process removes impurities and restores/improves the electrical, chemical and physical properties of the insulating oil. This system can be used on transformers, circuit breakers and switchgear/load tap changers.
|
|
|
|
Vacudyne Inc.
375 East Joe Orr Rd
Chicago Hts, IL 60411
708-757-5200
|
| |
|
